Bently Nevada 330105-02-12-10-02-CN 反向安装探头

产品简介

Bently Nevada 330105-02-12-10-02-CN是一款反向安装探头，以下是对该产品的详细解析：一、基本信息产品编号：330105-02-1

产品型号：

更新时间：2024-07-20

厂商性质：

访问量：

产品咨询 18185397189

产品分类

tel-phone

18185397189

article

技术文章

详细介绍在线留言

Bently Nevada 330105-02-12-10-02-CN是一款反向安装探头，以下是对该产品的详细解析：

一、基本信息

产品编号：330105-02-12-10-02-CN
产品类型：3300 XL 8mm反向安装探头
制造商：Bently Nevada（美国）
用途：主要用于监测旋转机械的振动情况，适用于反向安装场景。

二、产品规格与特性

总长度选项：根据具体型号，总长度可能有所不同。例如，某些型号的总长度为1.0米（3.3英尺）。
连接器选项：02代表微型ClickLocTM同轴连接器，这种连接器具有连接牢固、传输信号稳定等特点。
机构批准选项：不同的后缀可能代表不同的机构批准情况，如05可能表示多重批准。
探针尖端材料：聚苯硫酬(PPS)，这种材料具有良好的耐磨性和耐腐蚀性。
探头外壳材料：AISI 303或304不锈钢(SST)，提供优良的机械强度和抗腐蚀性。
重量：根据具体型号和配置，重量可能有所不同，一般在0.24至0.323千克之间。

三、安装与使用

安装方式：反向安装，通常需要在机器轴瓦盖上开一个特定规格的孔（如1/4-28 UNF孔，有效深度10mm），并使用双头螺栓固定探头。
配套设备：该探头通常需要与前置器一起使用，前置器为探头线圈提供高频交流电流，并处理探头前面由于金属导体靠近引起的参数变化，产生随探头端面与被测金属导体间隙线性变化的输出电压或电流信号。

The Bently Nevada 330105-02-12-10-02-CN is a reverse-mounting probe, the following is a detailed analysis of the product:

1. Basic information

Product Number: 330105-02-12-10-02-CN

Product Type: 3300 XL 8mm reverse mounting probe

Manufacturer: Bently Nevada (USA)

Usage: Mainly used to monitor the vibration of rotating machinery, suitable for reverse installation scenarios.

2. Product specifications and characteristics

Total length options: The total length may vary depending on the model. For example, some models have a total length of 1.0 m (3.3 ft).

Connector options: 02 stands for micro ClickLocTM coaxial connector, which has the characteristics of strong connection and stable transmission signal.

Agency approval options: Different suffixes may represent different agency approval situations, such as 05 May indicate multiple approvals.

Tip material: polystyrene sulfide (PPS), which has good wear and corrosion resistance.

Probe housing material: AISI 303 or 304 stainless steel (SST) for excellent mechanical strength and corrosion resistance.

Weight: Depending on the model and configuration, the weight may vary, generally between 0.24 and 0.323 kg.

Third, installation and use

Installation method: Reverse installation, usually need to open a specific specification hole (such as 1/4-28 UNF hole, effective depth of 10mm) in the machine bearing shell cover, and use a stud to fix the probe.

Supporting equipment: The probe usually needs to be used with a preprocessor that provides a high frequency AC current to the probe coil and processes the parameter change in the front of the probe due to the proximity of the metal conductor, producing an output voltage or current signal that varies linearly with the gap between the probe end face and the metal conductor under test.

微信图片_20240422102037.png