330180-50-00 Bently Nevada Proximitor传感器

关于330180-50-00 Bently Nevada Proximitor传感器，以下是对其详细信息的整理和归纳：

一、产品概述

• 型号：330180-50-00
• 品牌：Bently Nevada（本特利内华达）
• 类型：Proximitor（前置器传感器），是3300 XL系列的一部分

二、产品特点

1. 安装方式：
• 支持紧凑的导轨安装和传统的面板安装。面板安装时，其安装孔位置与以前四孔安装的3300前置器相同。
• 两种安装基板均具有电绝缘性，无需独立绝缘板。
2. 抗无线电干扰能力：
• 抗干扰能力强，即使安装在玻璃纤维防护罩中，也不会受到附近无线电信号的干扰。
3. 测量能力：
• 既能进行静态（位移）测量，又能进行动态（振动）测量。
• 主要用于油膜轴承机械的振动和位移测量，以及键相位和转速测量。
4. 互换性与兼容性：
• 所有3300 XL 8毫米接近传感器系统均提供优质性能，支持探头、延长电缆和前置器传感器的完全互操作性，无需匹配或校准单个组件。
5. 电源与输出：
• 配备-24 Vdc电源和10 k负载。
• 输出正比于探头端部与被测导体表面之间的距离的电压信号。

三、技术规格

• 线性范围：适用于广泛的位移或振动测量需求。
• 灵敏度：在特定条件下（如100 Hz，6000 cpm）的灵敏度为20mV/mm/s（500 mV/in/s）±5%。
• 频率响应：从小工作频率到1 kHz（60,000 cpm），典型值从+0到±3dB。
• 温度范围：具体使用温度可能因应用场景而异，但一般适用于工业环境。

四、应用领域

• 主要应用于流体薄膜轴承机器的振动和位置测量，以及键相参考和速度测量。
• 也可用于医疗卫生、环保、农业、电子、纺织皮革等领域的振动和位移监测。

About the 330180-50-00 Bently Nevada Proximitor sensor, the following is a summary of its detailed information:

I. Product overview

Model: 330180-50-00

Brand: Bently Nevada (Bentley Nevada)

Type: Proximitor (presensor), part of the 3300 XL series

Second, product characteristics

Installation method:

Supports compact rail mounting and traditional panel mounting. When installing the panel, the position of the mounting holes is the same as that of the previous four-hole 3300 front.

Both mounting substrates are electrically insulated and do not require a separate insulating board.

Radio interference resistance:

Strong anti-interference ability, even if installed in the glass fiber shield, it will not be interfered by nearby radio signals.

Measuring capability:

Both static (displacement) and dynamic (vibration) measurements can be made.

It is mainly used for vibration and displacement measurement of oil film bearing machinery, as well as key phase and speed measurement.

Interchangeability and compatibility:

All 3300 XL 8mm proximity sensor systems offer superior performance and support full interoperability of probe, extension cable and preprocessor sensors without the need to match or calibrate individual components.

Power Supply and Output:

Equipped with -24 Vdc power supply and 10 k load.

Output a voltage signal proportional to the distance between the probe end and the surface of the conductor under test.

3. Technical specifications

Linear range: Suitable for a wide range of displacement or vibration measurement needs.

Sensitivity: Under certain conditions (e.g. 100 Hz, 6000 cpm) the sensitivity is 20mV/mm/s (500 mV/in/s) ±5%.

Frequency response: Small operating frequency to 1 kHz (60,000 cpm), typical values from +0 to ±3dB.

Temperature range: The specific use temperature may vary depending on the application scenario, but it is generally suitable for industrial environments.

4. Application field

It is mainly used in vibration and position measurement of fluid film bearing machines, as well as bond phase reference and velocity measurement.

It can also be used for vibration and displacement monitoring in medical and health, environmental protection, agriculture, electronics, textile leather and other fields.

相关产品

Bently Nevada 330106-05-30-10-02-00

Bently Nevada 3500/70M

Bently Nevada 330750-20

Bently Nevada 330180-90-00

Bently Nevada 330180-50-05

Bently Nevada 330101-12-40-10-02-CN

Bently Nevada 330180-91-00

Bently Nevada 330104-00-10-10-02-CN

Bently Nevada 330102-20-55-10-02-CN

Bently Nevada 330180-51-05

Bently Nevada 330130-080-12-05

Bently Nevada 330104-00-04-10-02-00

Bently Nevada 330101-00-48-10-02-05

Bently Nevada 330180-91-05

Bently Nevada 3500/15-05-05-CN